Product #: PB60-P2C
The Paradox PB60 Photo Beam Detector delivers accurate and precise detection under the most demanding environmental conditions. With a newly developed Aspheric lens and a neoprene gasket to protect from harsh weather, the PB60 Photo Beam detector is the right choice for that tough perimeter security installation.
Features
High Reliability
Synchronized twin beams reduce false alarms caused by flying birds and falling leaves.
External Light Protection
Trouble-free operation, illumination is assured by an external light compensation circuit that was specially designed to effectively stop visible rays.
Easy Beam Alignment
The special view finder allows for fast aiming and preliminary
alignment. Also equipped with monitor jack to ensure proper
fine tuning.
Wide Angular Adjustment
Horizontally +/- 90º, vertically +/- 7º
Technical Specifications
Protection Range - 60M
Detection Method - Twin Synchronized Pulsed Beams
Infrared Beam - IR LED
Response Time - 50-700mS
Supply Voltage - DC 10.8 ~ 28V(non polarity)
Current - Receiver : 33m - Transmitter : 27m
LED - Tx Power (Green) Rx: Good (Green) / Alarm (Red)
Alarm Output - Dry Contact Relay Output 1C Form
Tamper Output - Dry Contact 1b(Rx)
Temperature - Range -20*C ~ +55*C
Beam Adjustment - Horizontal : 180* / Vertical :14*
Mounting Site - Indoor/Outdoor
Material - Cover (PC Resin) / Base (ABS RESIN)
Weight - Receiver : 275G (9.70 Ounces) Transmitter 265G (9.35 Ounces)
Description
Log in to see price.
Product #: PB30-P2C
The Paradox PB30 Photo Beam Detector delivers accurate and precise detection under the most demanding environmental conditions. With a newly developed Aspheric lens and a neoprene gasket to protect from harsh weather, the PB30 Photo Beam detector is the right choice for that tough perimeter security installation.
Features
High Reliability
Synchronized twin beams reduce false alarms caused by flying birds and falling leaves.
External Light Protection
Trouble-free operation, illumination is assured by an external light compensation circuit that was specially designed to effectively stop visible rays.
Easy Beam Alignment
The special view finder allows for fast aiming and preliminary
alignment. Also equipped with monitor jack to ensure proper
fine tuning.
Wide Angular Adjustment
Horizontally +/- 90º, vertically +/- 7º
Technical Specifications
Protection Range - 30M
Detection Method - Twin Synchronized Pulsed Beams
Infrared Beam - IR LED
Response Time - 50-700mS
Supply Voltage - DC 10.8 ~ 28V(non polarity)
Current - Receiver : 33m - Transmitter : 27mA
LED - Tx Power (Green) Rx: Good (Green) / Alarm (Red)
Alarm Output - Dry Contact Relay Output 1C Form
Tamper Output - Dry Contact 1b(Rx)
Temperature - Range -20*C ~ +55*C
Beam Adjustment - Horizontal : 180* / Vertical :14*
Mounting Site - Indoor/Outdoor
Material - Cover (PC Resin) / Base (ABS RESIN)
Weight - Receiver : 275G (9.70 Ounces) Transmitter 265G (9.35 Ounces)
Description
Log in to see price.
Product #: ACC-TS-18
TS-18 - Momentary push button
- S.P.D.T. contacts rated 4 Amps @ 28VDC
- Push button protected with 1" guard ring
- Switch terminated with colored leads
- Enclosure size: 1" H x 1-1/2" W x 2" L
Our price: $40.95
Product #: ACC-TS-9
- Narrow 1-3/4" stainless steel wall plate
- 5/8" x 7/8" green rectangular push button
- Labeled "PUSH TO EXIT"
- Switch illuminated with hi-brightness LED, operates on 12 or 24 volts AC/DC
- Momentary action switch
- D.P.D.T. contacts rated 3A @ 35VDC or 120VAC
- Temperature range -25C to 70C
- 1-1/4" switch depth behind plate
- UL 294 listed
Our price: $81.90
Product #: ACC-TS-7
- Single gang stainless steel wall plate
- 5/8' x 7/8' green, rectangular push button
- Labeled "PUSH TO EXIT"
- Switch illuminated with hi-brightness LED, operates on 12 or 24VDC
- Momentary action switch
- DPDT contacts rated 3A @ 35VDC or 120VAC
- Switch terminated with colored leads
- Temperature range -25C TO +70C
- 1-1/4" switch depth behind plate
- UL 294 listed
Our price: $81.90
Product #: ACC-TS-2
- Single gang stainless steel wall plate
- 2" green, square push button
- Labeled "PUSH TO EXIT"
- Momentary action switch
- Contacts rated 10A @ 35VDC or 120VAC
- Switch terminated with colored leads
- 2-1/2" switch depth behind plate
- Illuminated with hi-brightness LED
- UL 294 listed
Our price: $58.50
Product #: C706-E6G
| Features | |
|
|
Convenient credit card size |
|
|
Super-thin and flexible |
|
|
Vertical slot for clip attachment |
|
|
Durable PVC housing (white) |
|
|
Passive (no battery required) |
|
|
Suitable for high-quality photo ID printing |
Log in to see price.
Product #: C705-QBN
|
|||||||||||||
Log in to see price.
Product #: C705-A7C
|
|||||||||||||
Log in to see price.
Product #: C705-QPN
|
|||||||||||||
Log in to see price.
Product #: C705-U7N
|
|||||||||||||
Log in to see price.
Product #: C704-E6G (formerly CR-R704-B)
| Features | |
|
|
Attaches conveniently to a key ring |
|
|
Durable clear blue plastic housing |
|
|
Passive (no battery required) |
Log in to see price.
Product #: C702-E6G
|
Features |
|
|
|
Convenient credit card size |
|
|
Super-thin and flexible |
|
|
Vertical slot for clip attachment |
|
|
Durable PVC housing (white) |
|
|
Passive (no battery required) |
Log in to see price.
Product #: ACM12-G4N
8 User Definable Door Schedules
Now Supports Offline Mode - Ver 4.50 or higher
Programming - Babyware Only
| Features | |
|
|
Transformer Sharing: Use one transformer to power multiple modules that have this feature |
|
|
Grant access via card and/or panel access code with the R915 |
|
|
Arm with card and pin with the R915 |
|
|
Connections for 1 door (card reader, REX, door contact and lock output) |
|
|
Connect only 4 wires between the reader and ACM12 module when using a R910 or a R915 reader |
|
|
In-field firmware upgradeable via CV4USB and BabyWare |
|
|
Automatic unlocking schedule |
|
|
Door Left Open and Door Forced Open options |
|
|
Door unlock and extended delay timers |
|
|
Unlock door manually with button or PGM event |
|
|
Unlock Door On Fire Alarm option |
|
|
Safe Mode option (during a communication loss, the access control door connected to the module can grant access to up to 4 specified cards or any valid access card) |
|
|
Built-in supervised 1.5A switching power supply |
|
|
Push button to activate or deactivate the Auxiliary output |
|
|
Supports 4-wire and 26-bit Wiegand card readers What's New
|
Log in to see price.
Product #: ACM12-E9R
8 User Definable Door Schedules
Now Supports Offline Mode - VER 4.50 or higher
Programming - Babyware Only
| Features | |
|
|
Transformer Sharing: Use one transformer to power multiple modules that have this feature |
|
|
Grant access via card and/or panel access code with the R915 |
|
|
Arm with card and pin with the R915 |
|
|
Connections for 1 door (card reader, REX, door contact and lock output) |
|
|
Connect only 4 wires between the reader and ACM12 module when using a R910 or a R915 reader |
|
|
In-field firmware upgradeable via CV4USB and BabyWare |
|
|
Automatic unlocking schedule |
|
|
Door Left Open and Door Forced Open options |
|
|
Door unlock and extended delay timers |
|
|
Unlock door manually with button or PGM event |
|
|
Unlock Door On Fire Alarm option |
|
|
Safe Mode option (during a communication loss, the access control door connected to the module can grant access to up to 4 specified cards or any valid access card) |
|
|
Built-in supervised 1.5A switching power supply |
|
|
Push button to activate or deactivate the Auxiliary output |
|
|
Supports 4-wire and 26-bit Wiegand card readers What's New
|
Log in to see price.