New NVX80 High-end Detector Mask for Indoor/Outdoor Use
03/19/13
Setting a Higher Standard for Anti-Mask Protection - The New NVX80
NVX80We are excited to announce the official launch of the NVX80, a high-end detector designed for harsh indoor and severe outdoor environments. This new detector boasts a best in class combination of several technologies: including active IR and microwave anti-mask capabilities, a vivid OLED display (never seen before on this type of product), a menu-driven, 4 button interface.
It surpasses the specifications of the EN50131 Grade 3 certification.
The initial response from our distributors regarding the NVX80's effectiveness in detecting masking attempts and its ease of use and installation has been excellent.
The NVX80 is unique with its powerful anti-masking that blends Active IR and microwave technologies. Early testing by distributors has shown that it detects every masking attempt regardless of the material or technique being used.
This motion detector is completely menu driven and intuitive to use. Programming and configuration are simple with the NVX80's full-color OLED screen and four-button interface. Installers can take it out of the box and it's ready to go; easy to set up and quick to install.
The NVX80 is great example of the powerhouse products Paradox will be releasing in 2013. It is the latest result of Paradox's commitment to innovative products that push the limits of unconventional thinking, and effortlessly combine convenience and security.
The NVX80 features
Paradox Active IR anti-mask recognizes the degradation of lens clarity and objects blocking the main lens within 30 cm of the detector
8 detection channels
2x Quad PIR for short to long range detection (4 channels)
1x Independent Quad PIR for Creep Zone Detection (2channels)
1x 2- Active MW antenna (2 channels)
Paradox's proven Pet Immunity active for false alarm rejection in the short and medium detection ranges (note: Creep Zone detection neutralized)
3rd generation Paradox digital detection technology delivering improved detection and false alarm rejection
16m x 16 m/ 53ft x 53 ft coverage - refer to beam pattern for details
4m x 4m / 13ft x 13ft Creep Zone protection - refer to beam pattern for details
Easy Slide installation
Color OLED display featuring menu-driven, intuitive screens
Comprehensive diagnostics: individual testing for PIR, MW and anti-mask technologies
SoloTestTM for easy walk test execution
3 Configurable relay outputs - these outputs are also reported by the Digiplex EVO bus
Sleek, vandal-resistant design and tough construction
Paradox IP150 to Replace IP100 - More Features + Lower Price
01/23/13
.jpg)
Paradox Introduces IP150 to Replace IP100 with More Features and Lower Price
The new IP150 Internet Module upgrades and replaces the IP100. The IP150 provides SSL-encrypted email notifications when certain events occur. The module offers a log function that can log up to 64 events, which can be viewed online with improved speed, two web-controlled PGMs – all packaged in a space-saving design.
The IP150 builds upon the IP100 and integrates the following new features:
SSL support for sending secured emails via a secure sockets layer; a protocol for encrypting information over the Internet
HTTPS Secure support for improving security (HyperText Transfer Protocol Secure; a widely used communications protocol for secure communication over a computer network)
Two I/Os on board; controlled via the web interface, triggering an email
Event log on web interface; displays last 64 events
Easy installation; built-in clip for mounting in a metal box
In order to connect to the IP150, the associated iParadox must be upgraded to the latest available version.
The New IPRS-7 - IP/GPRS PC Receiver Software
01/22/13
The IPRS-7 is a desktop application that emulates the IPR512 GPRS/IP Monitoring Receiver with an unlimited number of accounts and newly added control and monitoring features.
This latest version of the IPRS-7 converts the emulator into a proactive device that can remotely control and monitor multiple panels. Installers and operators at central monitoring stations can directly connect to any panel registered to the emulator. Once connected, the operator can monitor the panel in real-time and activate the panel’s functionality. The operator can arm and disarm a system, activate PGMs, bypass zones and more from the IPRS-7 interface. With the updated IPRS-7 tool, installers and central monitoring stations have direct access to the panel control interface.
Usage Scenarios
Central Branch Supervision
A bank with several branches can position a central supervision station in its main branch and use the IPRS-7 to monitor and control the individual systems installed in its various sub-branches. The operator in central branch supervision station can easily arm and disarm a system and remotely activate PGMs to local bank management or security personnel. For example, an operator could open the door to a local branch vault for patrols in the field.
Proactive Maintenance Programs
Installers and dealers can configure an installed panel to report any system troubles or activity to the IPRS-7. Then the installer/dealer can contact their customer, whose system reported a trouble, and recom¬mend a corrective action such as replacing a battery, reconnecting to a panel and so on.
IPRS-7 Features
The ability to convert IP/GSM/GPRS panel reports into ADEMCO 685, SURGARD MLR2-DG, and RADIONICS 6500 (commonly used CSM formats)
Report to a local automation SW/HW
Log all events and save them in a CID format
Enhanced CMS capabilities
A new GUI delivering a more intuitive and simplified navigation
A new operator profiles: administrator, operator and guests
Three levels of panel connectivity: dependant on operator permissions
A new logging mechanism: enable a memory and file log with three levels – error, activity and debug
Expanded account events: 3 new internal account events and 12 receiver events
Automatic and manual back-up of events (time-based) and accounts (action triggered)
Improved backup capabilities: automatic, manual and password protected
An account recycle bin provides restore capabilities
Events buffered while the monitoring software is “down” will be automatically transferred when the monitoring software presence is detected
The software can be translated with Spanish, French and English dictionaries included
Direct communication with monitoring software over IP or serial port
Configurable activity logs
New Products
11/05/12
New Product Releases
Introducing the Redesigned, EN Certified Wireless PMD2P
The PMD2P, evolved from the tried and true PMD1P, is EN 50131 certified and hosts a few new features.
After testing in the field, this product was noted for its reliable performance, detection range at different sensitivity settings, RF transmission range and signal strengths. Installers also commented on the ease of installation of the dual tamper mechanism and the simplicity of battery replacement as a result of its new battery holder.
New features include:
- Dual-tamper mechanism
- EN 50131 Grade 2 certified
- Powered by 3x AAA batteries
- New lower price
Additional considerations: The PMD2P no longer supports Omnia protocol.
iParadox for Android™ Alarm System Control V1.1.89
IParadox for Android just got a whole lot better! For a complete list of all the changes, visit paradox.com or Google Play.
New features include:
Added languages
Support for alarm system label language
New PGM Edit screen
Support for PGM/Utility key on EVO192 (V2.7 or higher)
Improved animations
iParadox for Android can be purchased for $10.00 on Google Play
EVO192 192-Zone Control Panel V2.7
We are happy to announce the release of the EN 50131 certified version of the EVO192 panel.
New features include:
- EN 50131 Grade 3 certified
- New zone programming and additional zone/system/anti-mask options
- Support for automatic label broadcasting
- Support for PGM utility key activation via the iParadox app
Say Hello to iParadox for Android™
07/10/12
iParadox for Android
We are proud to announce the eagerly-anticipated release of iParadox for Android! With over 300 million official Android devices roaming the world, Android has become the mobile platform of choice. The iParadox app joins the excitement and gives users the same great features as iParadox for iOS; instant, continual remote access to their property security system turning any Android device into a remote touchpad.
iParadox provides lots of functionality and information at your fingertips. The multi-lingual iParadox has an intuitive user-interface which enables you to easily connect to your security system and edit its settings. Great features include MultiSite and ByPass Zone tools.
Furthermore, exclusive to Android are the following exciting features:
Vibrate and/or sound upon an alarm
Portrait and landscape mode support
True tablet support (no stretched icons, etc.)
Faster connection to site(s)
Can run in background; allowing users to perform other tasks
Zone view types for system/zone status and bypassed zones are remembered
Use a language in iParadox even if the device does not support it
Faster/easier navigation between screens; user can tap on screen to go forward/backward instead of using button or keys
More web-like interface with less dialog pop-ups
iParadox for Android is compatible with Android V1.6 or higher, Paradox EVO192 (V2.20 or higher), and all MG5000, MG5050, SP4000, SP5500, SP6000, SP65, and SP7000 systems. Note that for iParadox to function properly, your security system must include the IP150 Internet Module.
Visit the Google Play™ store to download the iParadox application to your Android Smartphone.
